Gas shielded, high alloyed, flux cored wire designed for hardfacing deposit with high hardness. Especially developed for hardfacing of parts subjected to high metal-to-metal wear and moderate impact. Weld metal can retain its hardness at high temperatures, till 600°C. Weld metal can be grinded and machined by diamond tools. Weld metal is resistant to cracking and shall not be welded more then 3 pass. A tough buffer layer with FCW 30 is recommended before hardfacing, if base metal has high carbon and low weldability. Heat treatment after hardfacing will decrease as-welded hardness.
Typical Applications: Hardfacing hot cut offs, shear blades, dies for pressure casting, scraper blades, conveyors, rollers, crusher rolls and worn parts in agricultural equipments.