EI 308MO

Standards

AWS/ASME SFA - 5.4 E308Mo-15
EN ISO 3581 - A E 20 10 3 B 22
TS EN ISO 3581 - A E 20 10 3 B 22
DIN M. No. 1.4443

Properties and Applications

Basic electrode, particularly designed for welding armour plates, dissimilar steels and for surfacing purposes. The weld metal consists of austenitic Cr-Ni-Mn-Mo stainless steel. It features high resistance to cracking caused by impact and high temperature and is therefore indicated for difficult to weld steels and depositing stress relaxing buffer layers on crack sensitive base metal or beneath hardfacing deposits. Use with DCEP. No pre-heat or post welding heat treatment is needed when welding armour plates. Interpass temperature should not exceed 120°C. Shall be used with shortest possible stick-out distance, at 90° angle to the work piece.
Ei 308Mo Sert Dolgu

Typical Chemical Values of Weld Metal

Type of AnalysisCSiMnCrNiMo
Weld Deposit0.080.551.8020.0011.502.50

Typical Mechanical Values of Weld Metal(%)

Test ConditionYield Strength (N/mm²)Tensile Strength (N/mm²)Elongation A5 (%)Charpy V-Notch Properties (J)
As welded4406904020°C → 70

Application Information

Welding Positions :
Ei 308Mo Kaynak Pozisyonu Ei 308Mo Kaynak Pozisyonu Ei 308Mo Kaynak Pozisyonu Ei 308Mo Kaynak Pozisyonu Ei 308Mo Kaynak Pozisyonu Ei 308Mo Kaynak Pozisyonu

Polarity:

Ei 308Mo Kutuplama DC(+)

Welding Parameters & Efficiency :

Diameter x Length (mm)Current (A)
2.50x25050-80
2.50x30050-80
3.25x30080-120
3.25x35080-120
4.00x350100-165
5.00x350140-220

Packaging Information

Product CodeDiameter X Length (mm)Pieces per Box (~)Weight Of The Box (kg)Boxes Per PackageWeight Of The PackagePackaging Type
13007GJEM22.50x3001041.81018.5VAC Box
13007MJEM23.25x300621.81016.3VAC Box
13007NJEM23.25x350602.0100.0VAC Box
13007QJEM24.00x350462.0918.6VAC Box
13007TJEM25.00x350252.0918.8VAC Box

Storage & Re-Drying Information

>It can be dried maximum 5 times.
>It has to be dried at 350°C for 2 hours.